消防车泡沫炮 PL48

PL24 型消防车泡沫炮是一款高效的中远距离灭火设备，具有流量大、射程远、喷射稳定等特点。 PL24 消防监视器 可在直流电模式和喷雾模式之间切换，提高灭火效率，同时保持安全距离，满足各种消防需求。

The HOWO TX multiple powder pumper fire engine is built on a SINOTRUK HOWO 6×4 chassis with a 4350+1350 mm wheelbase. It is powered by a Weichai WP10.340E32 engine rated at 340 HP and paired with an HW 10 speed transmission. The vehicle carries a 3000L water tank and a 3000L dry powder tank. A CB10/80 fire pump (80 L/s at 1.0 MPa) and a roof mounted cannon (45 L/s, 65 m range) handle fire suppression. Nine 80L nitrogen bottles at 15 MPa drive the dry powder system.

The HOWO 25 meter aerial platform fire truck runs on an MC07H.35-60 engine (257 kW) with a HOWO 4×2 chassis. It features a 4-section telescopic ladder reaching 25m high and 15m out. The truck carries 2,000L of water and 350L of foam. A CB10/60-MBP pump delivers 3,600 L/min, and the roof monitor has a 65m range. The 300 kg work platform includes auto-leveling. Safety features include overload cutoff, tilt protection, and a 5m LED mast light for night operations.

五十铃GIGA 6X4 10立方米泡沫消防车基于五十铃GIGA 6X4底盘打造，轴距为4600mm+1370mm。它搭载五十铃6UZ1-TCG61发动机和Fast 12速变速箱。车身前部为设备舱，中部设有8500升碳钢水箱和1500升不锈钢泡沫液箱，后部为泵房，配备CB10/60-XZ消防泵、控制面板、消防水带、消防器材等。车顶装有PL8/48型消防炮。

豪沃TX 4x2 7.5立方米泡沫消防车采用豪沃TX底盘，轴距4700毫米。它配备潍柴WP4.6NQ240E62发动机和中国重汽HW95508STCL变速箱。上部车体前部为设备箱，用于存放辅助消防设备。中部设有5.5立方米碳钢水箱和2立方米不锈钢泡沫液箱。后部泵房配备CB10/40-LC(BS)消防泵、控制面板、消防设备、位于水箱顶部的PL8/32消防炮以及两个欧标人孔。

The SITRAK 8×4 18500L foam fire truck is built on a SITRAK ZZ5446V516MF1 8×4 chassis with a 1950+4600+1400 mm wheelbase. It is powered by an MC11.46-61 engine rated at 460 HP and paired with a manual transmission. The vehicle carries a 12000L water tank and a 6500L foam tank. A Hill CB10/150-8FC fire pump (150 L/s at 1.0 MPa) and a roof mounted Akron PLKD10/100B-5178 monitor (100 L/s, water ≥90 m, foam ≥85 m) handle fire suppression. Standard equipment includes fire hoses, suction tubes, couplings, foam gun, and basic tool kit.

The ISUZU fire department utility truck for Senegal is built on an ISUZU FVR 4×4 chassis with a 4500 mm wheelbase. It runs on a 4HK1-TC50 engine rated at 205 HP with a manual transmission. The truck carries a 6000L water tank and a 4000L foam tank. A CB10/60 pump (60 L/s at 1.0 MPa) and a roof mounted PS48 monitor (48 L/s, water ≥60 m, foam ≥70 m) handle fire suppression. Standard gear includes hoses, suction tubes, couplings, foam gun, and basic tool kit.

The SINOTRUK HOWO TX foam fire tanker is powered by a 350 HP MC07H.35-60 engine on a 4×2 chassis. It features a 6000L water tank and a 2000L foam tank, a CB10/60-RS fire pump (60 L/s), and a PS60 monitor (60 L/s, water ≥70m, foam ≥65m). Standard gear includes fire hoses, suction tubes, couplings, foam gun, and basic tool kit. A PH64 foam proportioner (3%-6% mixing ratio, 64 L/s max flow) is also equipped for automatic foam mixing.